Mobile Dry Sand Blasting Equipment for Removal Paint / Steel
The application range of “spurting edge suction” is continuously
extended. It is mainly suitable for non-polluting sandblasting work
sites on the construction site, as well as small-area sandblasting
repair work on the construction site. Typical applications are in
the extrusion rolls and metal of plastic products. The surface of
the rolls and rubber rolls is finely blasted, and only this model
can make a truly "online" or "environmental" function. The
environmental advantages of this model are also irreplaceable in
places such as weld repair.
Main technical parameters:
1. Automatic Filling Value
The machine is provided with an automatic mushroom valve (Filling
Valve) for quick refilling of abrasive.
2. Tungsten Carbide Venturi Nozzle
The long & short series convergent-divergent tungsten carbide
lined blasting nozzle ensures high velocity, evenly distributed
blast pattern & higher blasting output and provides lower wear,
longer life and greater resistance against breakage.
3. Blast Hose
The blast hose is highly abrasion resistance with improved mixing
valve outlet for longer life, high flexibility with lower bend
radius & lightweight and electrically antistatic for safe
4. Abrasive Control Valve
The machine is fitted with a pinch valve with handwheel to control
the abrasive flow through a blast nozzle.
5. Abrasive Sieving
A wire screen is fitted with pneumatic vibrator to sieve abrasive
to avoid blast line choking.
6. Abrasive Tank Construction
The abrasive tank is fabricated from tested quality steel plate in
accordance with IS-2825 and hydraulically tested at 250 psi.
|Abrasive drum diameter (mm)||340||430||400|
|Abrasive drum volume (m3)||0.024||0.06||0.1|
|Work pressure (bar)||2-8kg||2-8kg||2-8kg|
|Spray gun quantity||1||1||1|
|Nozzle diameter (mm)||￠8 or 10||￠8 or10||￠8 or 10|
|Gush arenaceous tube||5m||5m||5m|
Please check the operating video in our YOUTUBE channel below: